Conçu pour les ERP
Can of flame retardant for textiles 5L – Eurotextil
5 L can — EUROTEXTIL
Flame retardant for textiles in a can. Made in France. Sprayer supplied for application.
Classified M1 — the highest level a combustible material can reach under the French classification — under the conditions of LNE test report no. P258195-DEC/1, issued by the LNE, a laboratory accredited for reaction-to-fire testing. The classification is obtained when the product is applied in accordance with the instructions for use, on the fibres and weights covered by the test report, until saturation and run-off. Durability is unlimited in time indoors, sheltered from the weather, on an article that is neither washed nor dry-cleaned.
Coverage. Points = area (m²) × weight (g/m²) × 0.2, and 200 points = 1 litre. PP 70 g/m²: 14 points/m². Cotton 150 g/m²: 30 points/m². PES 175 g/m²: 35 points/m². Linen 230 g/m²: 46 points/m². Order estimate. Application must in every case go as far as saturation and run-off.
Every order is delivered with the classification test report, the instructions for use and the application declaration to be completed by the applying company.
-
In stock
-
Delivery from €4.99 excluding VAT
-
M1 LNE classification test report provided
-
Classification durability: not limited away from the weather, on an item that is neither washable nor dry-cleanable, under the conditions of the test report
-
Made in France
-
Commandez avant minuit pour etre livre Saturday 10 October
Secure payment
Delivery within 24 business hours
Product manufactured in France
Experts at your service
Is this treatment suitable for different types of fibers and what precautions should be taken?
Yes, Eurotextil is classified M1 for cotton, linen, polyester, and polypropylene. Protection is maintained indoors, as long as the fabric remains unwashed. Regarding application, the product should never be diluted with water (including for cleaning) and must be stored above 15°C. It is crucial to perform a preliminary test on the fabric to ensure that there is no visible aesthetic alteration after saturation.
How does the 5L container adapt to the complex M1 dosage of textiles?
The 5L container contains 1000 treatment points. It is intended for professionals using precise measuring equipment to guarantee the correct M1 dosage. Based on the “points” rule (which varies according to the fabric weight), this container allows you to treat:
- Up to 50 m² of very lightweight fabrics (20 points/m²).
- Up to 13 m² of very heavyweight fabrics (70 points/m²).
Precise dosage control during transfer is essential for successful classification. To optimize the use of your fabric flame retardant, we recommend consulting the fabric weight chart.
What are the recommended application methods with the 5L container for effective M1 treatment?
The 5L container is suitable for high-volume applications:
- Professional pump sprayer: Ideal for quickly covering large curtains or carpets.
- Soaking: For small batches of loose fabric (a very effective method for saturating the fibers).
To facilitate work on specific items, an empty sprayer is provided free of charge for transferring the product. This size is designed for use with tools that guarantee uniform fabric saturation, essential for achieving M1 fire rating.
Precautions for use
- Never mix with water.
- Storage temperature: minimum 15°C. Do not expose to temperatures exceeding 50°C/122°F.
- Shake well before each use.
- Protect from freezing.
- Keep away from heat, hot surfaces, sparks, open flames, and other ignition sources.
- Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
- Use only in a well-ventilated area.
- Protect from sunlight.
- Do not use for any purpose other than that for which the product is intended.
- Shelf life: 24 months in its original, unopened, airtight container.
The information on this product sheet is provided for informational purposes only. Refer to the instructions for use, technical data sheet, and safety data sheet for further information.
Product safety and compliance file
CLP classification — Regulation (EC) No 1272/2008. Flammable liquids, category 2 (H225). Serious eye damage / eye irritation, category 2 (H319).
Pictograms: GHS02 (flame), GHS07 (exclamation mark). Signal word: Danger.
Hazard statements
H225 — Highly flammable liquid and vapour.
H319 — Causes serious eye irritation.
Precautionary statements
- P210 — Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
- P233 — Keep container tightly closed.
- P280 — Wear protective gloves and eye protection.
- P303+P361+P353 — IF ON SKIN: Take off immediately all contaminated clothing. Rinse skin with water or shower.
- P337+P313 — If eye irritation persists: Get medical advice / attention.
- P370+P378 — In case of fire: Use sand, alcohol-resistant foam or dry extinguishing powder to extinguish.
- P403+P235 — Store in a well-ventilated place. Keep cool.
This information is taken from safety data sheet FDS_EUROTEXTIL version 26.1 of 04/08/2026, which prevails and is supplied on request.
Compliance file — Contact us to receive the compliance file in Specimen format: application classification test report, classification test report and instructions for use.
What is fire-retardant treatment and what are the advantages of the 5L container for large projects?
Flame retardant treatment is the legal method for classifying textiles as M1 (fire resistance). Our Eurotextil fabric flame retardant is a versatile solution for both natural and synthetic fibers. The 5L container is designed for large-scale projects (theaters, convention centers, large hotels), offering the best price per liter and maximum yield. It allows you to treat the largest possible number of square meters of fabric, minimizing purchase costs and on-site refills.
How does the 5L container allow one to obtain the application declaration for a large quantity of fabric?
Proof of conformity is centralized. You will receive a blank application declaration and the conformity stickers corresponding to the 5-liter quantity. After applying the fabric flame retardant according to the dosage instructions, After applying the product in accordance with the instructions for use, the applying company completes, dates and signs the classification test report and affixes the stickers justifying the quantity used. The classification test report is a declaration by the applying company: it stays with the applicator, does not have to be returned to us, and we do not countersign it. It must be kept in the site safety register together with the instructions for use and the classification test report.
Classified M1 under the conditions of LNE classification test report no. P258195 – DEC/1 — LNE, a laboratory accredited for reaction-to-fire testing.
