LNE test report and application declaration provided | Delivery within 24 working hours | Tel.: +33 1 40 20 02 96

0

Textile flame retardant sample 100 mL — no application declaration supplied – EUROTEXTIL

Textile flame retardant sample 100 mL — no application declaration supplied – EUROTEXTIL

100 mL sample bottle

Ready-to-use flame retardant for textiles. Made in France. This sample is a technical test tool: no application declaration and no traceability labels are supplied with it. To obtain a classification, order the standard packaging: EUROTEXTIL is classified M1 — the highest level a combustible material can reach under the French classification — under the conditions of LNE test report no. P258195-DEC/1, issued by the LNE, a laboratory accredited for reaction-to-fire testing. Every order is delivered with the test report, the instructions for use and the application declaration.

  • In stock
  • Delivery from €4.99 excluding VAT
  • M1 LNE classification test report provided
  • Classification durability: as stated in the product’s test report
  • Made in France
  • Commandez avant minuit pour etre livre Saturday 10 October

Conçu pour les ERP

Secure payment

Delivery within 24 business hours

Product manufactured in France

Experts at your service

Product safety and compliance file

CLP classification — Regulation (EC) No 1272/2008. Flammable liquids, category 2 (H225). Serious eye damage / eye irritation, category 2 (H319).

Pictograms: GHS02 (flame), GHS07 (exclamation mark). Signal word: Danger.

Hazard statements
H225 — Highly flammable liquid and vapour.
H319 — Causes serious eye irritation.

Precautionary statements

  • P210 — Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
  • P233 — Keep container tightly closed.
  • P280 — Wear protective gloves and eye protection.
  • P303+P361+P353 — IF ON SKIN: Take off immediately all contaminated clothing. Rinse skin with water or shower.
  • P337+P313 — If eye irritation persists: Get medical advice / attention.
  • P370+P378 — In case of fire: Use sand, alcohol-resistant foam or dry extinguishing powder to extinguish.
  • P403+P235 — Store in a well-ventilated place. Keep cool.

This information is taken from safety data sheet FDS_EUROTEXTIL version 26.1 of 04/08/2026, which prevails and is supplied on request.

Compliance file — Contact us to receive the compliance file in Specimen format: application classification test report, classification test report and instructions for use.

Why is textile flame retardancy a delicate process and does it require prior testing?

Textile flame retardant treatment is a process that saturates fibers (natural or synthetic) with a flame-retardant agent to achieve an M1 fire rating. However, Silk and velvet are not within the scope of our test report: we do not claim an M1 classification on these fibres. The sample lets you check the appearance of a fabric, it does not extend the scope of the classification. your Textile Flame Retardant.

Does the sample include the M1 classification for the fabrics?

No. This product is a diagnostic tool, not a classification. It contains no official classification test report or traceability labels. To fire-retardant your curtains, drapes, or blinds in accordance with public access building regulations, you must purchase the Eurotextil sprayer or the 5L container.

What defects should be looked for during the fabric test?

On a scrap of fabric, saturate a small area. After 12 hours, check three points: the absence of halos (drying stains), the stability of the colors (no bleeding) and the suppleness of the fabric (no excessive stiffness).

Our other products