5L flame-retardant container for natural Christmas trees

Fireproofing a natural Christmas tree is not just a regulatory formality for public establishments; it’s a vital safety measure. A natural tree, especially when it begins to dry indoors, becomes a veritable reservoir of highly flammable fuel.

• Preventing flashover: An untreated tree can burst into flames in less than 30 seconds. Applying a certified M1 fire retardant prevents this immediate ignition by creating a chemical barrier that neutralizes the spread of flames through the needles and branches.
• Public safety and evacuation: By slowing combustion, the M1 treatment provides precious minutes for evacuation and emergency response. It also limits the release of opaque and toxic fumes, which are often the primary cause of danger in a fire.
• Compliance and responsibility: For those in charge of establishments (town halls, hotels, shopping centers), the M1 rating is proof that all necessary measures have been taken to guarantee fire safety. Without the certificate provided with our fire-retardant Christmas tree treatment, the safety commission may require the immediate removal of the tree. Investment protection: A fire-retardant Christmas tree significantly reduces the risk of major material damage due to an accidental fire (short circuit in a string of lights, candle, etc.).

Fireproofing is a mandatory treatment for classifying natural plants as M1 (non-flammable) in Public Access Buildings (ERP). Our 5L container of natural fir tree fire retardant offers the best value per liter for managers of large spaces. It is specifically designed to impregnate the needles and branches of natural fir trees to stop any spread of flame. This format allows you to treat large volumes without needing multiple containers, ensuring simplified logistics on your decorating projects.

The quantity of fire-retardant product for fir trees required depends directly on the width and height of the tree. With a 5-litre container, you can treat:

• 5 fir trees measuring 2 metres in height (allow approximately 1L per tree of this size).
• One monumental 6-metre fir tree (depending on the density of the foliage).

Find our full range on the category page: Fire Retardant for Fir Trees.

1L = 200 points

The 5L container is perfectly suited for use with a professional pressure sprayer (garden type) or a spray gun, allowing for much faster and more even application on large trees. For easier finishing touches, an empty sprayer is included free of charge with your container. The fir tree fire retardant should be applied until the needles are completely saturated. Ensure the tree is clean, dry, and free of flocking (artificial snow) before beginning treatment.

No. It is essential to understand that this Christmas tree fire retardant is formulated exclusively for natural Christmas trees (Nordmann fir, Norway spruce). Its chemical composition reacts with the tree’s fibers. It will not work on plastic or PVC surfaces. For artificial structures, please consult our specific sections on our Christmas Tree Fire Retardant page.

• Never mix with water.
  Storage temperature: minimum 15°C.
  Do not expose to temperatures exceeding 50°C / 122°F.
  Shake well before each use.
  Protect from freezing.
  Pressurized container: may burst if heated.
  Keep away from heat, flames, and sparks.
• Do not pierce or burn, even after use.
  • Use in a well-ventilated area.
  • Protect from sunlight.
  • Store in the original, tightly closed container for up to 24 months.
  • The information provided is for informational purposes only.
  • Refer to the instructions for use and technical data sheet for specific details.

The data in this product sheet is provided for informational purposes only. Refer to the instructions for use, technical data sheet, and safety data sheet for further information.

The certification process remains simple and rigorous to guarantee your compliance with the safety commission:

1. With your order, you will receive an M1 fire treatment certificate and numbered stickers corresponding to a volume of 5 liters.
2. Once the treatment is complete, affix the stickers to the certificate (proof that the required quantity of fir tree fire retardant has been used).
3. Fill out the document and send it to us by email for certification. We will return it to you signed, thus validating the safety of your installations.